Project : 1
Title : Redesign And Structural Analysis Of Hydraulic Press Table.
Description : Our goal was to redesign a hydraulic press table that is easy to manufacture and also has less material wastage while being manufactured to achieve Design For Assembly and Design For Manufacturing criteria. After the design phase, we ran structural analysis on the table to check if the new design can withstand the forces and pressure that is applied on it. Overall, out of the 2 designs, one design passed the structural analysis and also passed the design standard, as the cost of manufacturing was reduced by 10 percent.
Project : 2
Title : Assembly And Design Of A Mono-block Pump.
Description : Our goal was to simplify the assembly process of the Mono-block Pump. The
goal was achieved by redesigning the pump to reduce the number of parts,
needed to be assembled by integrating those parts to the body of the pump while
Project : 3
Title : Testing Of Brand New Fuel Cells In A Testing Station
Description : To check whether the new fuel cells are running at optimum efficiency and collaborate with other teams to find solutions to improve efficiency of the fuel cells.
Project : 4
Title : Create And Run Programs For CNC Lathe And CNC Milling Machines
Description : The Pump industry orders creation of key slots and hollow shafts of different dimensions to input into their mass production CNC units. My objective is to create programs, to produce the required products and test run them in a CNC. The software used here is Master Cam.