James Haney

Perform work at field locations, which include, but are not limited to customer premises, Company stations and non-Company premises.

Assist in work on conductors and equipment energized at any distribution voltage up to 750 volts when a qualified employee of higher classification is present at the job site.

Receive, inspect, test, adjust, clean, repair, replace parts and subassemblies of single-phase and polyphase meters and make incidental calculations.

Clean, prepare and test meters, instrument transformers, insulating protective equipment and other material.

Install, remove, connect, and disconnect all self-contained single phase and polyphase meters and service and repair such installations.

Check meter readings and inspect meter installations.

Read meters, recorders, controls, and other utility equipment as assigned.

Assist in making voltage and load checks.

Perform duties in accordance with the Companys meter standards, safety rules and operating regulations and practices.

Install and maintain equipment on customers premises and perform work in a professional manner.

Develop computer skills to operate equipment and to perform assigned work.

Calibrate, repair, and test standards, instruments, controls and equipment as assigned.

Electronic fire alarm systems
Valve work
Vibration Monitoring Systems
Motors and Drives
Compressor Units
Turbine
Smart Transmitters
Allen Bradley PLCs
Transmitters and switches
Power Supplies
Basic Instrumentation and Electronic Troubleshooting, Installation, or Calibrations on Pressure, Level, Flow, and Temperature Measurement and Indication devices
Installation of control systems for plant processes using switch/relay logic, Programmable Logic Controllers and Distributed Control Systems.

Experience is in Industrial & Environment
Produce & Revise AutoCAD, Micro-Station and Omni-Flow Drawings
Revise Iras & Board Drawings
Layout and revise drawings
Work with Engineers, Designers, Vendors & Clients
Able to create and work on Excel., Word. Documents, Access & PowerPoint
Field verification of electrical / instrumentation equipment
Calibrate instruments.
Verify wiring.
Understand basic design principles.
Good Working knowledge of different drawing types and their association with other drawings Responsible for
Maintaining books for units and making sure they are under OSHA regulations.
Verification of information on drawing
Marking-up drawings for drafters
Checking drafters work
Assembling project packages
Project budget & schedule
Maintaining all project relations and paperwork dealing with project
Communicating with Engineers, Lead Designers, Vendors & Clients
Vendor Research
Document Control
Scoping & estimating projects Layout/design of a projects