Jonathan Cabrera
Rochester Institute of Technology, Class of 2020
From Lynn, MA
Rochester Institute of Technology
Lynn Vocational Technical Institute
Jonathan Cabrera graduated from Rochester Institute of Technology with a BS in applied arts and sciences. Some 4,000 degrees were conferred in the 2019-2020 academic year at all of RIT's campuses....
August, 17 2020 - Verified by Rochester Institute of TechnologyJonathan Cabrera was named to the Dean's List at Rochester Institute of Technology for the 2019 Fall Semester. Degree-seeking undergraduate students are eligible for Dean's List if their term ...
February, 26 2020 - Verified by Rochester Institute of TechnologyJonathan Cabrera was named to the Dean's List at Rochester Institute of Technology for the 2019 Spring Semester. Cabrera is in the computer aided drafting program. Congratulations!
July, 01 2019 - Verified by Rochester Institute of TechnologyNineteen students and eight faculty members from Rochester Institute of Technology's National Technical Institute for the Deaf were recently inducted into the college's first national honor society...
June, 10 2015 - Verified by Rochester Institute of TechnologyJonathan Cabrera, a third-year student in the computer integrated machining program in RIT's National Technical Institute for the Deaf, made the Dean's List for the fall 2014-2015 semester. Degree...
February, 16 2015 - Verified by Rochester Institute of TechnologyJonathan Cabrera, who is in the computer integrated machining technology program in RIT's National Technical Institute for the Deaf, made the Dean's List for the Spring 2013-2014 semester. Degree...
June, 20 2014 - Verified by Rochester Institute of TechnologyJonathan Cabrera of Lynn made the Dean's List for the Fall 2013 semester. Degree-seeking undergraduate students are eligible for Dean's List if their quarterly GPA is greater than or equal to 3.40...
February, 19 2014 - Verified by Rochester Institute of TechnologyJonathan Cabrera of Lynn, Mass., a first-year student in the computer integrated machining technology program in RIT's National Technical Institute for the Deaf, made the Dean's List for the Sprin...
June, 24 2013 - Verified by Rochester Institute of TechnologyJonathan Cabrera of Lynn, Mass., a first-year student in RIT's National Technical Institute for the Deaf, made the Dean's List for the Winter 2013 quarter. Rochester Institute of Technology is i...
March, 26 2013 - Verified by Rochester Institute of TechnologyJonathan Cabrera of Lynn, Mass., a first-year student in RIT's National Technical Institute for the Deaf, made the Dean's List for the Fall 2012 quarter. Rochester Institute of Technology is int...
December, 18 2012 - Verified by Rochester Institute of TechnologyJonathan Cabrera, of Lynn, Mass., has enrolled in Rochester Institute of Technology's National Technical Institute for the Deaf, the nation's first and largest technological college for deaf and ...
October, 03 2012 - Verified by Rochester Institute of Technology- Ensure that every machines procedure is done in accordance with the strict guidelines by HORST Sterling Machine
- Perform proper setup and calibration procedures for all equipment and accessories to be used on projects
- Translate the requirements of detailed part drawings into measurements for production
- Discussed career-pathing opportunities with students
- Participated in a learning partnership to connect first-year students with resources and opportunities available in the community
- Provided support as needed to execute experiential activities
- Developed manufacturing processes by studying nanophotonics requirements, researching, designing, modifying, and testing manufacturing methods, and equipment
- Developed manufacturing, assembly, and fabrication processes in nanotechnology
- Improved manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout
- Conducted product and process analysis for quality improvement, cost reduction, and enhanced efficiency
- Conducted research, design plus development of all manufacturing processes inclusive of production control, assembly procedures, and production equipment
- Provided assistance to improve production procedures, processes, controls, and programmings
- Meet blueprint specification criteria of following proper procedures
- Observed and assisted employees in setting up machines and programming on Computer Numerical Control (CNC)
- Responsible for the operations of secure and highly available computing platforms
- Made sure equipment and programs properly used right
- Observed and assist students in setting up AutoCAD and SolidWorks programs
- Performed maintenance, updates, and troubleshooting on equipment
- Used specialized tools, such as caliper, indicator, and micrometer to perform inspections to verify machined part met blueprint specification
- Understanding and follow the standards and specifications as required by Geometric Dimensioning and Tolerance (GD & T)
- Write nonconformance reports by having new ideas or solutions
- Observed and assisted employees in setting up machines
- Used specialized tools, such as micrometer, and caliper to perform precise inspections to verify that machined part met blueprint specifications
- Worked with team to developed communication and problem-solving skills
- Contributed ideas to improve engines
- Performed precision machining operations using mills, lathes, and Electrical Discharge Machine (EDM) to manufacture parts as requested by employees
- Understanding and follow the standards and specifications as required by GE Aviation
- Distributed tools as requested by students
- Maintained and operated milling and lathe machines
- Observed and assisted students in setting up machines
- Engraved code numbers on parts
- Fabricated and assembled metal structures and equipment through welding
- Interpreted blueprint and set up parts in the engraver